Protomop 16
$16.44
Description
PROTOMOP 16 MICROFIBER MOP (16 ounces)
This mop is great for raised access floors in electronic cleanrooms and computer rooms and for laying down floor finishes
MATERIAL: 70% Polyester/30% Polyamide Microfiber Yarn
CONSTRUCTION: Looped Ends, Sewn Headband and Sewn Tailband.
QUALITIES: 10:1 Absorbency Ratio, Mildew Resistant, Autoclavable (approximate 30% shrinkage), Can Be Irradiated, Non-Linting, Mechanical Cleaning action of Microfiber enhances particle collection, High Chemical Tolerance, Leaves less liquid on surface than other mops, Quick Absorbency, Long life.
PROTOMOP 16 (Blue Band 16oz.)
* ADVANTAGES OF MICROFIBER MOPS OVER EXISTING MOPS:
Retains standard headband/tail band mop construction but replaces cotton or poly yarn with microfiber yarn, a new material on the American market.
No “break-in” period. Ready to use immediately.
More absorbent – this means fewer trips to the mop bucket.
Better particle pick up due to the 1,000’s of “tiny fingers” – cleans better than present mops.
Lighter – our 16 oz microfiber mop will pick up more water than a 24 oz cotton mop
Glides on the floor, less torque than cotton mops – fewer injuries
Leaves the floor drier – this means safer floors.
Non-Linting.
Quick change of mop refills.
High tolerance to cleaning chemicals.
“GREEN” product as it cleans without chemicals and may be laundered 200 plus times.
Anti-microbial construction.
No smell – won’t go sour.
This mop may also be irradiated and autoclaved for the industries concerned with viable particles.
CLEANROOM CLEANING AGENTS AND MOP COMPARISON CHARTS
The table below shows the effectiveness of PROTOGREENTM detergent compared to 12 Megohm DI water and a 70% Isopropyl Alcohol (IPA) and 30% 12 Megohm DI water. Protogreen Cleanroom Surface Cleaner is as effective as or more effective than DI water or the IPA mixture. The average number of particles before testing were 463 @ 0.5 microns and larger and 80 @ 5.0 microns and larger.